点击图片查看原图
“固定翼遥控航模多旋翼多轴穿越机 飞控”参数说明
| 是否有现货： | 是 | 形状： | 轰炸机 |
| 材质： | 塑料 | 适用年龄： | 10岁以上 |
| 使用场地： | 室外 | 型号： | NAZE32 rev5 |
| 规格： | NAZE32 rev5 | 商标： | 雪狼 |
| 包装： | 纸合，包装膜 | 产量： | 10000 |
“固定翼遥控航模多旋翼多轴穿越机 飞控”详细介绍
新手视频教程：http://www.moz8.com/forum.php?mod=viewthread&tid=41236
为小型室内或者中等尺寸的室外多轴飞行器设计.
轴距200-550MM之间的
基于 Multiwii二次开发
6DOF版和10DOF版区别在于有没有气压计以及电子罗盘
讨论帖：http://www.rcgroups.com/forums/showthread.php?t=1653753
Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to setup, with configuration based on the familiar “MultiWii” software.
Features:
Battery voltage monitoring
Built-in FrSky telemetry converter
Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
10DOF
Onboard USB for setup and configuration
Extra bright LEDs
Modern GUI for all operating systems, Baseflight Configurator
Specifications:
Height: 36mm
Width: 36mm
Weight: 6 grams (no headers, 8 grams with)
Sensors: MPU6050
Headers: Includes 1x 3x6 90 degree pin headers, 1x 1x2 straight pin headers, 1x 2x3 90 degree pin headers, and 1x 2x5 straight pin headers.
Additional Notes:
If you do not have a CPPM enabled Receiver, you will also need to purchase the RC Breakout Cable.
为小型室内或者中等尺寸的室外多轴飞行器设计.
轴距200-550MM之间的
基于 Multiwii二次开发
6DOF版和10DOF版区别在于有没有气压计以及电子罗盘
讨论帖：http://www.rcgroups.com/forums/showthread.php?t=1653753
Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to setup, with configuration based on the familiar “MultiWii” software.
Features:
Battery voltage monitoring
Built-in FrSky telemetry converter
Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
10DOF
Onboard USB for setup and configuration
Extra bright LEDs
Modern GUI for all operating systems, Baseflight Configurator
Specifications:
Height: 36mm
Width: 36mm
Weight: 6 grams (no headers, 8 grams with)
Sensors: MPU6050
Headers: Includes 1x 3x6 90 degree pin headers, 1x 1x2 straight pin headers, 1x 2x3 90 degree pin headers, and 1x 2x5 straight pin headers.
Additional Notes:
If you do not have a CPPM enabled Receiver, you will also need to purchase the RC Breakout Cable.